Model 1000 is designed for long,
dependable service of exhausting
unwanted air or supplying fresh
ventilation. Ruggedly constructed with
an all-steel housing and a durable
baked safety-yellow epoxy powder
finish, the unit features a 1/3 HP
industrial service rated motor with
assured durability and dependable
service under all conditions. All
ventilators are precision balanced for
smooth,quiet operation. CSA and
CEESI certified.
The Model 1200 offers all the
capabilities of a ruggedly constructed
ventilator with the added feature of a
two speed motor. With free air ratings
of 774cfm to 1171cfm, the 1200 blower
is applicable to a variety of purging and
ventilating applications. Featuring an all
steel housing, a fully certified motor, a
lightweight and compact design, and
two operation settings, this ventilator
offers a long life of versatile and
dependable service. CEESI certified.
Two-speed circuitry doubles the
efficiency of this durable blower. At high
speed, the 1240 is ideal for quickly
purging unwanted fumes from confined
space locations. The low speed
provides the right volumes of clean air
for maintaining safe ventilation levels
for workers in enclosed or underground
areas. Constructed with a rugged, all
steel housing, the versatile 1240 is
equipped with 1HP when on high and
1/3HP on low, UL and CSA listed
motor. CSA and CEESI certified
Model 1360 is the monster of the
Axials. This heavy duty, 2-speed
blower is designed to move high
volumes of air. Uses 16" diameter
ventilation hose. Ideal for smoke
ejection.
These models are our most popular
models for confined space ventilation.
Available in either 120 Volt AC or 12
Volt DC (Model 1400D). Both accept an
8" ventilation hose. A suction adapter is
also available. The CSA approved
1325D may be coupled to our 1690D LP
heater to provide fresh warm air.
CEESI certified. Both models offer big
performance in a compact, lightweight
unit.
These axial "Air-Pacs" are blower,
hose, and storage canister all-in-one.
The "75" in the model numbers denotes
15' hose and "85" in the model numbers
denotes 25' length hose. Add "S" to the
end of any model and get that particular
length of hose in the Spacemaker
version. All "13" series are 120 V AC
powered and all "14" series are 12 V
DC.
The Model 1500S is a one-piece
centrifugal heater blower popular for its
heavy duty construction and often used
as a permanent truck mounted unit. It
has two burners allowing different
degrees of efficiency and performance.
This model, like all other Pelsue
models, comes with a thermal switch
that cuts the burners off and leaves the
fan runnng should an upset condition
occur. It is certified by CGA and CEESI.
This one-piece axial propane heater
blower also provides fresh warm air. It
is extremely efficient requiring only
45,000 BTU's of input to get a 125°F
heat rise. The Model 1590 comes with
a 24 Volt AC circuitry and stainless
steel heat exchanger. It is certified by
A.G.A., CGA, and CEESI and is the
only one of its kind on the market.
The Model 19000A (TAP-19) supplies
heated air and electric power, 120V and
240V for the manhole or any area
without external power. The blower
may run independent of the heater
however, the blower must be "ON" for
the heater to operate. When equipped
with the available options it becomes a
valuable work center under all
conditions.
NBK511  3' x 8" hose-used to join some
heater/blowers. Standard connections.
15' x 8" with Posi-lock.
20' x 8" with Posi-lock. (Ideally suited
for self-contained splicing vans.)
25' x 8" with Posi-lock. (Ideally suited
for self-contained splicing vans.)
Posi-lock blower hose clamp only.
N2760 HOSE HUGGER ®
Nutmeg's Answer to Your Blower Hose
Problems
Heavy duty 8" x 15' blower hose
permanently housed in rigid container
16" long. Safe (flame retardent) and
easy to use. Easy access to replace
hose. Finish in Construction Orange.
Nutmeg Utility Products, Inc.

1755 Highland Avenue, P.O. Box 723
Cheshire, CT 06410
Toll Free: 800-424-4246
Telephone: 203-272-2291
Fax : 203-272-1830

For your convenience we accept MasterCard and Visa.



Women-Owned Business Enterprise

Please direct technical comments or questions
to:
info@nutmegutility.com
NUTMEG UTILITY PRODUCTS, INC.
1755 Highland Ave Cheshire CT 06410
HOSE HUGGER

N2605-15H    Replacement hose, 15'
N2760           Canister & hardware
N2760H         Hose hugger w/15' hose
N7605-15      15' Blower hose w/ 1 posi-lock
N7605-20      20' Blower hose w/ 1 posi-lock
N7605-25      25' Blower hose w/ 1 posi-lock
N7605-3        3' Blower hose w/ 1 posi-lock